Material Handling Systems

Part location pins orient a re-usable flow-through vacuum fixture (spoilboard) and the part sheet material onto an in-feed conveyor table. Pop-up conveyor balls allow easy positioning and removal of both the fixture and the material on and off the machine's worktable.

This system increases production cycle times on single table CNC routers by eliminating the need to stop the machine for processed part unloading, or allowing one operator to control production across multiple machines. Material handling tables are modular and can be fitted to any production environment by allowing the use of as many or as few tables as needed.
 

Two NEW Material Handling Systems from Komo Machine, Inc. The Automatic Material Handling System for the Komo VR Mach Series showed off the increased productivity of a machine that will load, clean and unload nested parts on a VR Mach Series machine. The cycle time was approximately 25 seconds and emphasized the increase in productivity.

Video of Komo Automatic Material Handling System
View One: Windows Media Video (443 kb)
View Two: Windows Media Video (509 kb)

The next NEW option provided by Komo Machine is the Automated Material Handling system for the Solution Traveling Gantry Series machine. Based on the same concept of increasing your productivity, the Automated system will remove the nested parts from the machining table and clean the table as it completes its cycle. This requires only that your operator load the new material on the router and allows them to start the machining cycle while they sort out the finished parts.

Designed to increase your productivity, the two NEW Material Handling Systems allow for greater operator safety and faster output for your company.

Komo has many machine worktable options, from table dimensions to special fixturing to roller hold-down systems. Contact Komo or your local Komo representative for more information.