Meridian Bridge Saw Series

  

The Meridian Bridge Saw compliments the Komo Summit Stone Machining Center or excels as a stand alone bridge saw.

 

A 20HP, 1200RPM arbor motor with Laser Blade Path Verification power this bridge saw to give you the power and versatility you need. The saw blade can be tilted up to 50º and the machine comes with an 80º hydraulic tilting table for easy loading of full slabs. The table can be rotated 360º with eight 45º hard stops and variable degree air caliper brake with a size of 6 foot by 11 foot to accommodate any project you can throw at it

 

With 14 inches of programmable Z travel, Omron PLC control, Touch Screen operation, and high quality components, the Meridian Bridge Saw gives you quality and dependability to feed your shop’s production.

Standard Machine Specifications
  Meridian Bridge Saw Series
Motor: One (1)
  20HP (15kw) Arbor Motor
  1,200RPM
  Arbor size of 1.97" (50mm)
  Up to 50º Tilt of the saw blade
  Saw Blade Laser Alignment System
  Comes with one (1) 16" Saw Blade
 
Table(s): One (1) 72" x 132"
  80º Hydraulic Tilt Table
  2HP Hydraulic Motor
  360º Rotation with four (4) 90º hard locks and variable degree air caliper brake
  Two (2) Removable Sheet Stop Pins
 
Feedrate/Traverse Rates X Axis up to 360ipm (9,000mm/min)

Y Axis up to 720ipm (18,000mm/min)

Z Axis up to 30ipm (760mm/min)
 
Repeatability +/-0.125" (3.1mm) Unidirectional Repeatability
 
Control Omron CP1H PLC
 
Screen 8.4" Color Touchscreen LCD
 
Warranty Two (2) Year Komo Standard Warranty
 
Options Steel constructed Leg Assembly
       
  Copyright© Komo Machine, Inc. All rights reserved. Komo Machine, Inc. reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this web site or within documents distributed through this site without prior notice.